Great Plains PTO Kits 2-3-Section - Manual (Page 39)

Great Plains Manufacturing, Inc. Table of Contents Index Appendix A - Installation 35
2014-09-10 Table of Contents Index 411-015M
6in Fan: Attach Cooler Hoses & Close
This page applies only to 6-inch/6-cage-screw fans.
For 8-inch fans, continue page 36.
6in Fan: Cooler Inlet Hose
Note: Model YP2425F (kit 411-014A) has two coolers.
Inlet and outlet hoses are different for each cooler.
Fan#1 is the forward fan.
Fan#2 is the rear fan.
Refer to Figure 38
40. Select one new cooler inlet hose
from the table
below (hose is kit dependent).
41. Route the hose through the hole prepared at
step 39. Connect it to the upper fitting on the cooler.
42. Mark the free end of this hose “INLET”. This step is
particularly important for kits using identical inlet
and outlet hoses and/or for short hoses which may
not be marked with a part number at both ends.
43. Select one new cooler outlet hose from the
table below (hose is kit dependent).
Route the hose through the hole prepared at
step 39. Connect it to the lower fitting on the cooler.
44. Mark the free end of this hose “OUTLET”.
Note: The external ends of these hoses are not
connected at this time.
6in: Reinstall Fan Cap
Refer to Figure 39
45. Position the saved fan screen cap
on the fan
screen , aligning existing screw holes. Secure cap
to screen with saved sheet metal screws .
46. Continue at “Install Oil Reservoir” on page 39.
6in Fan Hose Reference
Kit Fan Cooler Inlet Hose Kit Fan Outlet Hose
401-934A - 841-196C HH1/2R2 024 3/4FJIC 401-934A - Existing fan return hose at fan.
401-936A - 841-196C HH1/2R2 024 3/4FJIC 401-936A - Existing fan return hose at fan.
401-938A - 811-279C HH1/2R2 060 3/4FJIC 401-938A - Existing fan return hose at fan.
401-939A - 811-269C HH1/2R2 036 3/4FJIC 401-939A - 841-249C HH1/2R2 108 3/4FJIC
401-941A - 811-269C HH1/2R2 036 3/4FJIC 401-941A - 811-665C HH1/2R2 208 3/4FJIC
401-943A -
841-196C HH1/2R2 024 3/4FJIC
401-943A -
841-506C HH1/2R2 030 3/4MJIC
3/4FJIC
401-945A - 811-291C HH1/2R2 072 3/4FJIC 401-945A - Existing fan return hose at fan.
411-014A 1
811-268C HH1/2R2 048 3/4FJIC
connected to fan outlet tee later
411-014A 1
811-268C HH1/2R2 048 3/4FJIC
to cooler #2
2
811-268C HH1/2R2 048 3/4FJIC
from cooler #1
2
841-506C HH1/2R2 030 3/4MJIC
3/4FJIC
411-138A - 841-921C HH5/8R2 032 7/8FJIC 411-138A - Existing fan return hose at fan.
411-147A - 851-345C HH5/8R2 060 7/8FJIC 411-147A - Existing fan return hose at fan.
Figure 38:
Cooler Hoses
34636
n
u
INLET
OUTLET
n
u
1
2
3
Figure 39:
Close Fan Cage
34631
2
3
1
n u
263
263
242
241 264
241 250
263 272
243
240 240
240 272
283
296