Compatible planters – Great Plains PTO Kits 2-3-Section User Manual
Page 29
Great Plains Manufacturing, Inc.
Appendix A - Installation
25
2014-09-10
411-015M
Compatible Planters
1.
Check the kit part number, and planter serial
number plate before beginning installation. The kits
may not be compatible with all older planters.
Yield-Pro
®
2- or
3-Section Planter
Seed Drive
PTO Pump Kit
401-934A
401-935A
401-936A
401-937A
401-938A
401-939A
401-940A
401-941A
401-942A
401-943A
401-944A
401-945A
401-946A
401-951A
411-014A
411-138A
411-147A
Model
Oldest
Ground Drive
✔
Ground Drive
✔
s/n A1111K+
a
a. For hydraulic drive models, check the serial number plate. For ground drive models, note whether the seed monitor is a
DICKEY-john
®
IntelliAg
®
(supported) or Seed Manager SE (unsupported). Models with lower serial numbers or
manufactured prior to 2005 may not be mechanically compatible with these kits, may have a fan with no case drain, and/or
have a hydraulic drive controller and/or seed monitor for which flow rate setup instructions are not provided in this manual.
Hydraulic Drive
✔
✔
b
b. On Hydraulic Drive planters, use the Ground Drive kit if you desire to leave the hydraulic drive on a dedicated circuit.
Ground Drive
✔
Hydraulic Drive
✔
✔
year 2005+
Ground Drive
✔
s/n A1190B+
Hydraulic Drive
✔
Ground Drive
✔
Hydraulic Drive
✔
✔
Ground Drive
✔
Hydraulic Drive
✔
Hydraulic Drive
✔
Hydraulic Drive
✔
Hydraulic Drive
✔
Hydraulic Drive
✔
Hydraulic Drive
✔
Hydraulic Drive
✔
Hydraulic Drive
✔
Hydraulic Drive
✔
Hydraulic Drive
✔
✔
Hydraulic Drive
✔
✔
Ground Drive
✔
Ground Drive
✔
s/n 1056S+
c
c. 3PYP and 3PYPA models must also have hydraulic steering.
Ground Drive
✔
s/n 1056S+
Hydraulic Drive
✔
✔
s/n 1056S+
Ground Drive
✔
s/n 1056S+
Hydraulic Drive
✔