Great Plains PTO Kits 2-3-Section - Manual (Page 28)

411-015M Table of Contents Index 2014-09-10
24 2- & 3-Section YP PTO Pumps Table of Contents Index Great Plains Manufacturing, Inc.
Appendix A - Installation
Before You Start
Most accidents are the result of negligence and
carelessness, usually caused by failure of the installer to
follow simple but necessary safety precautions. Allow no
one to install the Yield-Pro
®
PTO pump before carefully
reading this manual.
Fasteners may be loosely assembled. Remove them
before mounting the component. Due to evolving
manufacturing practices, sub-assemblies may already be
completely pre-assembled. If so, check that fasteners are
tight, and skip the unneeded assembly steps.
Tools Required
• a lift or hoist with a 100 pound \ 45 kg capacity
a
• basic hand tools
• 10 to 15 gallons (38 to 57 liters) of good quality
10-W30 mineral base hydraulic fluid, viscosity from
70-250 SUS range at 210
°F (100°C).
• bucket for collecting oil
• hose marker, such as white electrical tape and
indelible marker
• power equipment with a Type 2 or 3 PTO for flushing
and charging the system
• the planter Operator and Parts manuals
• protective footwear if the planter already has coulters
or row cleaners installed
• 14.9 mm (
9 ⁄
16
or 0.56 inch) drill bit, suitable pilot bit,
and portable drill with 15 mm (
5 ⁄
8
inch) or larger chuck.
Torque values for fasteners are shown on page 85.
Call-Outs
a. For a pull-type planter, a jack or hoist with a 1000 pound (453 kg) capacity may be needed, depending on the outcome of the
inspection at step 12 on page 28.
to
and
to
Single-character callouts identify
components in the currently referenced
Figure or Figures. Numbers and letters may
be reused for different items on other pages.
to Two-digit callouts in the range 11 to 69
reference existing parts removed and
reused. They are listed on page 90.
to Three-digit callouts in the range 101 to 310
reference new parts. The descriptions match
those on the parts, cartons, bags or item
tags, as well as descriptions your updated
Parts Manual.
1 9
a z
11 69
101 310