Using this manual, Definitions, Call-outs – Great Plains PTO Kits 2-3-Section User Manual
Page 11: Owner assistance, Definitions call-outs
Great Plains Manufacturing, Inc.
Introduction
7
2014-09-10
411-015M
Using This Manual
This manual familiarizes you with safety, operation,
adjustments, maintenance and assembly. Follow the
recommendations to ensure safe and efficient operation.
Definitions
The following terms are used throughout this manual.
Note: Paragraphs in this format provide useful
information related to the current topic.
Liability, Economic and Results Risks:
Paragraphs in this format present a crucial point of information
related to the current topic. Read and follow the directions to:
remain safe, avoid serious damage to equipment and ensure
desired field results.
Right-hand and left-hand as
used in this manual are
determined by facing the
direction the machine will
travel while in use unless
otherwise stated.
An orientation rose (shown at right) depicts Up, Right,
Back, Down, Left and Front.
Call-Outs
The information in this manual is current at printing.
Some parts may change to assure top performance.
Owner Assistance
If you need customer service or repair parts, contact a
Great Plains dealer. They have trained personnel, repair
parts and equipment specially designed for Great Plains
products. Your machine’s parts were specially designed
and should only be replaced with Great Plains parts.
Record your Yield-Pro
®
PTO pump kit model number
here for quick reference:
Model Number:__________________________
Date Purchased: __________________________
Your Great Plains dealer wants you to be satisfied with
your updated machine. If you do not understand any part
of this manual or are not satisfied with the service
received, please take the following actions.
1.
Discuss the matter with your dealership service
manager. Make sure they are aware of any
problems so they can assist you.
2.
If you are still unsatisfied, seek out the owner or
general manager of the dealership.
For further assistance write to:
U
D
L
R
B
F
to
and
to
Single-character callouts identify
components in the currently referenced
Figure or Figures. Numbers and letters may
be reused for different items on other pages.
to
Two-digit callouts in the range 11 to 69
reference existing parts removed or
reconnected. They are listed on page 90.
to
Three-digit callouts in the range 101 to 308
reference new parts. The descriptions match
those on the parts, cartons, bags or item
tags, as well as descriptions your updated
Parts Manual.
1
9
a
z
11
69
101
308
Product Support
Great Plains Mfg. Inc., Service Department
PO Box 5060 Salina, KS 67402-5060
785-823-3276