Wheatheart X160 Series - Manual (Page 107)

W HEATHEART - G RAIN A UGERS 5. P LACEMENT
X160-85, X160-105, X160-125
30875 R0 107
5. Placement
This auger is designed to be transported and operated without unhitching unit
from tractor.
5.1. PLACEMENT PROCEDURE
1. Disconnect PTO driveline from tractor and secure in transport saddle.
2. Ensure that tractor and auger are securely hitched together.
Important:
Use a type of hitch pin (see Auger / Tractor Hookup section) that will not allow
auger to separate from towing vehicle.
3. Disconnect the safety chain from the intake hopper.
4. Before connecting hose, ensure that the quick-connect coupler on auger and
tractor is clean and free of dirt by wiping with a cloth.
WARNING
Before continuing, ensure you have read and understand the relevant information
in the safety section. Safety information is provided to help prevent serious injury, death, or
property damage.
CAUTION
Always tow auger in the lowered position.
Disconnect PTO driveline from tractor for
transport and placement.
WARNING
Auger must be hooked up to tractor for all
operations, including transport, raising,
placement, and augering grain.
NOTICE
When positioning the auger, the PTO driveline must be
disconnected from the tractor and placed in the transport
saddle to prevent damage to auger and PTO driveline.
CAUTION
Dirt in the hydraulic system can damage the cylinder o-
rings, causing leakage and the possible failure of the
system and personal injury.