Metrohm 873 Biodiesel Rancimat Manual - Manual (Page 73)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 4 Operation
873 Biodiesel Rancimat ￭￭￭￭￭￭￭￭ 65
Evaluate induction time
on | off (Default value: on)
Determination of the induction time (see "Induction time", page 66).
Evaluate stability time
on | off (Default value: off)
Determination of the stability time (see "Stability time", page 67).
Note
If you select this evaluation mode, you always need to calibrate the con-
ductivity measuring cell beforehand.
Delta Kappa
Conductivity change for the determination of the stability time.
Range 1 ... 400 µS/cm
Options for induction time
Evaluation delay
Waiting time until starting the curve evaluation.