Metrohm 873 Biodiesel Rancimat Manual - Manual (Page 18)

3.1 Setting up the instrument ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
10 ￭￭￭￭￭￭￭￭ 873 Biodiesel Rancimat
3 Installation
3.1 Setting up the instrument
3.1.1 Packaging
The instrument is supplied in highly protective special packaging together
with the separately packed accessories. Keep this packaging, as only this
ensures safe transportation of the instrument.
3.1.2 Checks
Immediately after receipt, check whether the shipment has arrived complete
and without damage by comparing it with the delivery note.
3.1.3 Location
The instrument has been developed for operation indoors and may not be
used in explosive environments.
Place the instrument in a location of the laboratory suitable for operation
and free of vibrations, if possible protected from corrosive atmospheres and
contamination by chemicals.
The instrument should be protected against excessive temperature fluctua-
tions and direct sunlight.
Note
In order to improve accessibility for the measuring positions, the instru-
ment can be placed on the optionally available 6.2059.000 turning ring.
3.2 Mounting accessories
3.2.1 Mounting accessories for the internal air supply
The gas in the Biodiesel Rancimat is normally supplied using the internal
air pump, which sucks in laboratory air. For air supply and air purifica-
tion, the following accessories must be mounted on the rear of the Biodiesel
Rancimat: