Metrohm 873 Biodiesel Rancimat Manual - Manual (Page 155)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 4 Operation
873 Biodiesel Rancimat ￭￭￭￭￭￭￭￭ 147
2 Carry out GLP test with test resistor
￭ Click on the menu item Tools ▶ GLP test ▶ Conductivity... and
confirm with [Next >].
The following dialog window appears:
￭ Select the option Use test resistor.
￭ Under Resistance, enter the value of the test resistor in Ohms
(10000
Ω for 6.2109.030) and confirm with [Next >].
￭ Connect the test resistor to the electrode connector (3- 2 ) indicated
in the dialog window and confirm with [Next >].
￭ Continue with step 4.
3 Carry out GLP test with standard solution
￭ Insert a measuring vessel, each filled with 60 mL standard solution,
together with the measuring vessel cover at all measuring position
(see Chapter 4.6, page 75).