Metrohm 873 Biodiesel Rancimat Manual - Manual (Page 165)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Handling and maintenance
873 Biodiesel Rancimat ￭￭￭￭￭￭￭￭ 157
Display Cause Remedy
Device BUSY test error. Switch the instrument off
and on again. If the error
occurs again, please
notify Metrohm Service.
Device ADC test error. Switch the instrument off
and on again. If the error
occurs again, please
notify Metrohm Service.
Device EEPROM test error. Switch the instrument off
and on again. If the error
occurs again, please
notify Metrohm Service.
Device Defective mains voltage
(deviation > 10 %). Check power supply.
5.5 Quality Management and validation with Metrohm
Quality Management
Metrohm offers you comprehensive support in implementing quality man-
agement measures for instruments and software. Further information on
this can be found in the brochure «Quality Management with
Metrohm» available from your local Metrohm agent.
Validation
Please contact your local Metrohm agent for support in validating instru-
ments and software. Here you can also obtain validation documentation to
provide help for carrying out the Installation Qualification (IQ) and the
Operational Qualification (OQ). IQ and OQ are also offered as a service
by the Metrohm agents. In addition, various application bulletins are also
available on the subject, which also contain Standard Operating Proce-
dures (SOP) for testing analytical measuring instruments for reproducibility
and correctness.
Maintenance
Electronic and mechanical functional groups in Metrohm instruments can
and should be checked as part of regular maintenance by specialist person-
nel from Metrohm. Please ask your local Metrohm agent regarding the
precise terms and conditions involved in concluding a corresponding main-
tenance agreement.