Metrohm 873 Biodiesel Rancimat Manual - Manual (Page 42)

4.2 Instrument and Program Settings ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
34 ￭￭￭￭￭￭￭￭ 873 Biodiesel Rancimat
￭ If a softswitch is used, activate the option Softswitch in use and
select the serial interface of the softswitch to which the instrument
is connected under Softswitch port.
￭ Confirm the entry with [OK].
3 Restart program
￭ Close the program with the menu item File ▶ Exit.
￭ In the Windows Start menu under Programs ▶ Metrohm ▶ Bio-
diesel Rancimat, click on the menu item Biodiesel Rancimat.
￭ Enter the Administrator password and confirm with [OK].
The program is opened. The message Instr.#: Ready now appears in
the status bar for all connected instruments.
4.2.2 Managing access rights
The 873 Biodiesel Rancimat program offers extensive password protec-
tion, allowing each menu item to be provided with individual access rights.
The dialog Users and groups manager, used to manage the access rights,
is only accessible to the Administrator. The Administrator himself is not listed
as a user, but has all access rights.
First of all, the access rights are given to different Groups. Then, individual
Users can be assigned to a specific group.
Note
User lists are best created and passwords are best entered immediately
after the first program start.
The setup for the users and their access rights is carried out in the following
order:
1. Add a new group
2. Adjust rights for this group
3. Create users in this group