Metrohm 873 Biodiesel Rancimat Manual - Manual (Page 49)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 4 Operation
873 Biodiesel Rancimat ￭￭￭￭￭￭￭￭ 41
Switching the temperature log on and off
Proceed as follows:
1 Switch on the recording for block A or B
￭ Click on the menu item Tools ▶ Temp. logging ▶ Block A on.
or
￭ Click on the menu item Tools ▶ Temp. logging ▶ Block B on.
2 Switch off the recording for block A or B
￭ Click on the menu item Tools ▶ Temp. logging ▶ Block A off.
or
￭ Click on the menu item Tools ▶ Temp. logging ▶ Block B off.
4.2.6 Optimizing program and database
The data which the program Biodiesel Rancimat requires for displaying
the Results window is saved in the file Nachaus.prg. With the standard
installation, this file is located at C:\Program Files\Metrohm\Biodiesel Ranci-
mat\Template. As soon as the file is greater than 10 MB, you should
optimize and compress the program, so that this file no longer has any
superfluous data and the program runs faster again.
The file size of the database Repos.mrd can make access to existing
determinations considerably slower. If you regularly work with the program
and carry out a large amount of determinations, you should optimize the
standard database Repos.mrd once a month.
Optimizing the program
Proceed as follows to optimize the program:
1 Quit program
￭ Close the program Biodiesel Rancimat (see Chapter 4.1.1, page
24).
2 Optimize program
￭ In the windows Start menu, click on the menu item Pro-
grams
▶ Metrohm ▶ Biodiesel Rancimat ▶ Opti-
mize ▶ Program.