Metrohm 873 Biodiesel Rancimat Manual - Manual (Page 65)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 4 Operation
873 Biodiesel Rancimat ￭￭￭￭￭￭￭￭ 57
Opening a selected method and adjusting parameters
Proceed as follows to open the method which is selected in the Control
window and adjust its parameters:
1 Open method
￭ In the Control window, click on the symbol in the required
Block A or B.
The dialog window "Method name" appears.
2 Adjust parameters and save changes
￭ Adjust the parameters (see Chapter 4.5.2, page 60).
￭ Confirm the changes with [Save].
Opening an existing method and adjusting parameters
Proceed as follows to open an existing method and adjust its parameters:
1 Open existing method
￭ In the Control window, click on the symbol or the menu item
File
▶ Open method....
The dialog window Open method appears.
￭ Click on the required method and confirm the selection with
[Open].
The dialog window "Method name" appears.
2 Adjust parameters and save changes
￭ Adjust the parameters (see Chapter 4.5.2, page 60).
￭ Confirm the changes with [Save].
Renaming an existing method
Proceed as follows to rename an existing method: