External shunt modules, 156 ar – Rockwell Automation 2099-BMxx Kinetix 7000 High Power Servo Drive User Manual User Manual
Page 156
156
Rockwell Automation Publication 2099-UM001D-EN-P - December 2012
Appendix A
Specifications and Dimensions
Line reactors compatible with a 8720MC-RPS Regenerative Power Supply
sourcing input power from an AC power supply are listed below. They must be
configured as shown in the Regenerative Power Supply example on page
.
Table 63 - Compatible Kinetix 7000 Drives, 8720MC-RPS Regenerative Power Supplies and
8720MC Line Reactors
External Shunt Modules
Refer to this table for active shunt solutions for use with Kinetix 7000 drives from
Rockwell Automation Encompass Partners.
Kinetix 7000 Drive
Cat. No.
8720MC-RPS Regenerative Power
Supply Cat. No.
(1)
(1) Regenerative Power Supply (RPS) selection is for a single motor/drive combination. When combining multiple drives on the same
RPS module, the selection will change.
8720MC Line Reactor
Cat. No.
2099-BM07-S
8720MC-RPS065BM
8720MC-LR05-048B
2099-BM08-S
2099-BM09-S
8720MC-LR10-062B
8720MC-RPS065BM and
8720MC-RPS065BS
8720MC-LR05-048B
(requires two units, one for the master
RPS unit and one for the slave RPS unit.)
2099-BM11-S
8720MC-LR10-062B
(requires two units, one for the master
RPS unit and one for the slave RPS unit.)
8720MC-RPS190BM
8720MC-LR10-100B (required two units)
2099-BM12-S
Rockwell Automation Encompass Partner
Contact Information
Powerohm Resistors, Inc.
5713 13th Street
Katy, TX 77493
Tel: (800) 838-4694
Bonitron, Inc.
521 Fairground Court,
Nashville, TN 37211
Tel: (615) 244-2825