Rockwell Automation 1769-HSC Compact High Speed Counter Module User Manual
Page 103
Rockwell Automation Publication 1769-UM006E-EN-P - July 2013
103
Module Configuration, Output, and Input Data
Chapter 4
Invalid Counter Assigned to Range (InvalidCtrAssignToRange12 through
InvalidCtrAssignToRange15)
InvalidCtrAssignToRange12 is set when the indicated range in the output array
refers to a non-existent counter.
• It is set (1) when Range12To15[
n].ToThisCounter > NumberOfCounters.
• It is cleared (0) when Range12To15[
n].ToThisCounter
NumberOfCounters
.
When this error occurs, the entire output array is rejected until a valid
configuration is detected.
Invalid Range Limit (InvalidRangeLimit12 through InvalidRangeLimit15)
This bit is set when the range limits are invalid according to the limitations
indicated in Range12To15[
n].HiLimOrDirWr and Range12To15[n].LowLimit
in the output array.
• 1 = Range limits are invalid.
• 0 = no error
When this error occurs, the entire output array is rejected until a valid
configuration is detected.
Range Active (RangeActive.0 through RangeActive.15)
This word reflects the status of all of the ranges. When a count or rate meets the
criteria programmed for a given range, the range is active.
• 1 = active
• 0 = inactive/false
Input Array Word 3
15
14
13
12
11
10
09
08
07
06
05
04
03
02
01
00
Range Active
RangeActive.0 through RangeActive.15
Input Array Word 3
15
14
13
12
11
10
09
08
07
06
05
04
03
02
01
00
Range Active
RA3
RA2
RA1
RA0
TIP
When the range is enabled and active, the output mask for that range is
applied.