Rockwell Automation 1734-IE4S POINT Guard I/O Safety Modules User Manual - Manual (Page 3)

Rockwell Automation Publication 1734-UM013J-EN-P - July 2014 3
Summary of Changes
This manual contains new and updated information. Changes throughout this
revision are marked by change bars, as shown to the right of this paragraph.
New and Updated
Information This table contains the changes made to this revision.
Topic Page
Added information on accessing Release Notes. 12
Added information on single-channel operation to the list of 1734-IB8S module features 18
Updated Single-channel Mode Normal Operation and Fault Detection figure. 26
Updated Dual-channel, Equivalent Normal Operation and Fault Detection figure. 28
Updated Complementary, Normal Operation and Fault Detection figure. 29
Updated Dual-channel Setting figure. 39
Added information on placing Series B modules. 48
Updated European Hazardous Location Approval information. 52
Added guidance for using the 1734-IE4S module's sensor power supply. 58
Corrected the Class ID in Table 15 Safety Analog Input Module (1734-IE4S) 158
Updated Appendix C: Specifications 161
Added specification for Sensor Supply Undercurrent Fault. 166
Added Safety Data for Series B modules to Appendix C. 173