Rockwell Automation 1203-CN1 ControlNet Communications Module 1203-CN1 - Manual (Page 79)

Publication 1203-5.13 – February, 2002
Appendix
A
Specifications
Appendix Objectives Appendix A provides the specifications that you may need to install,
repair, or use your 1203-CN1 ControlNet communications module.
Specifications The following table gives the specifications for the 1203-CN1
ControlNet communications module.
Important: To meet EMC Emission (Class A, Group 1) require-
ments, you must place the module in a full metal enclosure. It is the
end user’s responsibility to choose a full metal enclosure that will
provide adequate emission protection.
Category Specifications
Dimensions 3.92 x 2.69 x 3.54 in (99.5 x 68.4 x 90.0 mm)
Weight 0.52 lbs. (236.7 g)
Operating Temperature 0 to +55 °C (32 to 131°F)
Storage Temperature -40 to +85 °C (-40 to 185°F)
Relative Humidity (Operating) 5 to 80% non-condensing
Relative Humidity (Non-Operating) 5 to 95% non-condensing
Shock (Operating) 30g peak acceleration, 11(+/-1)ms pulse width
Shock (Non-Operating) 50g peak acceleration, 11(+/-1)ms pulse width
Vibration (Operating) 2.5g @5Hz-2KHz
Vibration (Non-Operating) 5g @5Hz-2KHz
Power Consumption 250mA at 24V DC (-20% / +30%)
ESD Susceptibility (IEC 1000-4-2) 6KV contact, 8KV open air
Regulatory Agencies UL 508 and CUL
European Union EMC and Low Voltage Directives
DIN Rail Mounting Standard 1.38 x 0.30 in. (35 x 7.5 mm)
!
ATTENTION: The 1203-CN1 ControlNet
communications module contains ESD (Electrostatic
Discharge) sensitive parts. Static control precautions are
required when installing, testing, or servicing this
assembly. Device malfunction may occur if you do not
follow ESD control procedures. If you are not familiar
with static control procedures, refer to Allen-Bradley
publication 8000-4.5.2, Guarding Against Electrostatic
Damage, or other applicable ESD protection handbook.