Rockwell Automation 1203-CN1 ControlNet Communications Module 1203-CN1 - Manual (Page 3)

Publication 1203-5.13 – February, 2002
Summary of Changes
Summary of Changes
Updated Information The following changes to this manual have occurred since Publication
1203-5.13 – July 1998, P/N189939 (02).
Getting Started Section: Establishing a Serial Connection with the 1203-CN1 Module
Paragraph added:
DriveExplorer (v1.01 or higher) software can now also be used on
1203-CN1s that are v2.001 or higher. Do not use DriveExplorer
software with v1.xxx CN1s.
Appendix A Power Consumption specification updated to 250mA at 24V DC
(-20% / +30%).
Appendix B
Parameter 21 Serial Port Rate Valid Value/Settings updated.
0 = 2400
1 = 4800
2 = 9600
3 = 19.2K
4 = 38.4K
Default setting updated.
2 = 9600
Important statement added to description.
Important: These settings are valid for v1.004 or higher CN1s.
v1.003 or lower CN1s only have two settings: 0 = 9600 and
1 = 19.2K.
Appendix D Section: Class Code 0x99 - SCANport Pass-Through Link Object
Common Services:
Service Code updated.
0x0E
0x10