Rockwell Automation 1203-CN1 ControlNet Communications Module 1203-CN1 - Manual (Page 54)

Publication 1203-5.13 – February, 2002
4-10 Configuring a Controller to Communicate with the 1203-CN1 Module
11. In the Network menu, select Save. The Save Configuration
dialog box appears.
Figure 4.10
Save Configuration Dialog Box
12. Click OK. The Save As dialog box may appear.
Important: If the ControlNet Services dialog box appears with a
warning about the MAX scheduled node being set too low, click OK.
You will correct the problem later while verifying network properties.
Figure 4.11
Save As Dialog Box
13. In the File name field, enter a name for the file and then click
Save.
Clicking Save saves the configuration to a file on the PC and
downloads the configuration to the controller on the network.