Rockwell Automation 1203-CN1 ControlNet Communications Module 1203-CN1 - Manual (Page 36)

Publication 1203-5.13 – February, 2002
3-8 Getting Started
4. Press the Enter key. The main menu of the 1203-CN1 ControlNet
to SCANport Adapter application appears.
Refer to the Navigation Techniques section in this chapter for
information on navigating in the software.
Figure 3.9
Main Menu
You now have access to the module’s software. Go to the Navigation
Techniques section on page 3-8 for more information on using it.
Navigation Techniques To perform any of the functions in the software (e.g., editing
parameters), you need to know the following navigation techniques:
Press: To
1, 2, 3, 4, 5, 6, 7, 8, 9, 0 Select an option in the Main Menu (1 – 5) or enter a value
for a parameter in the Parameter screen (0 – 9).
Escape Return to Main Menu or abort changes to a parameter.
Down Arrow View the next parameter.
Up Arrow View the previous parameter.
Right Arrow View the next value for a parameter.
➀
Left Arrow View the previous value for a parameter.
➀
Enter Save a value for a parameter.
➀
In the Fault Config Logic Command parameter (11), the right and left arrow keys let you
navigate through the 16 bits.