Rockwell Automation 1203-CN1 ControlNet Communications Module 1203-CN1 - Manual (Page 141)

Index I–3
Publication 1203-5.13 – February, 2002
messaging
description, 6-1
emulated block transfer, 6-6, F-1 to F-19
examples, 6-2 to 6-8
N-file structure, 6-3, C-1
PCCC, 6-1 to 6-8, E-1 to E-2
module, refer to 1203-CN1 module
N
navigation techniques in software, 3-8
network node address
highest on network, 4-13
highest receiving I/O data, 4-13
setting on 1203-CN1 module, 2-4
viewing in RSNetWorx, 4-4
N-file structure, 6-3, C-1
O
objects, refer to ControlNet objects
P
parameters
module
datalinks, B-1 to B-2
default settings, 3-1
editing, 3-9
fault configurable inputs, B-1 to B-4
list of, B-2 to B-4
viewing with PCCC messaging, 6-3
SCANport product
using emulated block transfer to view,
F-3 to F-13
using PCCC messages to view, 6-2, 6-4
PCCC messaging, 6-2, 6-4, E-1 to E-2
PLC
configuring to communicate with 1203-CN1
module, 4-2 to 4-15
ladder logic programs, 5-1 to 5-6
power supply, 2-7, A-1
R
removal of 1203-CN1 module, 2-8
resetting the module, B-4
RSLinx, 4-3
RSLogix5
description, 5-2
RSNetWorx
description, 4-1
downloading configuration to PLC, 4-10
mapping 1203-CN1 module to ControlNet
network, 4-6 to 4-12
online mode, 4-2 to 4-5
saving configurations, 4-10
verifying network properties, 4-13 to 4-15
S
safety precautions, P-3
SCANport
cables, 2-2, 2-6, 2-8
definition, P-3
peripherals, P-3, 1-3
products, P-3, 1-3
serial connection
cable, 3-2, 3-7
using a PC running terminal emulation
software, 3-3 to 3-7
using a VT100-compatible terminal, 3-7 to 3-8
serial number, 3-13
serial port rate, refer to baud rate
specifications, A-1
T
technical support, P-4
terminal
VT100-compatible, 3-7
terminal emulation software, 3-3
terms and abbreviations, P-3
tools, refer to equipment
troubleshooting, 7-1 to 7-4