Rockwell Automation 22-COMM-P PowerFlex Profibus Adapter - Manual (Page 47)

Configuring the Profibus Scanner 4-9
12. Click Add to continue adding modules. Select “Parameter Access”
and click OK.
Figure 4.14 Add Modules: Parameter Access Selection Window
13. The “Parameter Access” module has now been added as shown in
Figure 4.15 .
Figure 4.15 Modules: Parameter Access Viewing Window
14. Click on the SLC Address tab as shown in Figure 4.16 . Settings can
be chosen to map Station modules to SLC addresses. In our example
M1/M0 files are used for Input / Output.
Note that the Reference/Feedback Drive 0 (Ctrl/Stat & Ref/Fdbk)
starts at word 0.