Rockwell Automation 22-COMM-P PowerFlex Profibus Adapter - Manual (Page 12)

1-4 Getting Started
User-Supplied Equipment
To install and configure the adapter, you must supply:
❑ A small flathead screwdriver
❑ Profibus cable
– One 9-pin, male D-Sub PROFIBUS connector.
[Note: PROFIBUS connectors are available from a variety of
sources and in various sizes. As such, there may be mechanical
limitations that prohibit the use of some connectors.]
❑ Configuration tool, such as:
– PowerFlex 4-Class HIM (22-HIM-A3 or 22-HIM-C2S) –
required to access adapter parameters when not using
DriveExplorer software or DriveExecutive software
– DriveExplorer (version 3.01 or later) – uses 22-SCM-232 DSI
serial converter (version 2.001 or later)
– DriveExecutive stand-alone software (version 3.01 or later) or
bundled with the DriveTools SP suite (version 2.02 or later)
❑ Profibus configuration software
❑ Controller configuration software