Rockwell Automation 22-COMM-P PowerFlex Profibus Adapter - Manual (Page 29)

Chapter
3
Configuring the Adapter
This chapter provides instructions and information for setting the
parameters in the adapter.
For a list of parameters, refer to AppendixB , Adapter Parameters . For
definitions of terms in this chapter, see the Glossary .
The adapter stores parameters and other information in its own
non-volatile memory. You must, therefore, access the adapter to view
and edit its parameters. The following tools can be used to access the
adapter parameters:
Topic Page
Configuration Tools 3-1
Using the Optional, External PowerFlex 4-Class HIM 3-2
Using DriveExplorer via 22-SCM-232 or 1203-USB 3-3
Setting the I/O Configuration 3-4
Setting the Node Address 3-4
Setting a Fault Action 3-5
Setting DSI Loss Action 3-6
Resetting the Adapter 3-8
Viewing the Adapter Configuration 3-9
Configuration Tools
Tool See…
PowerFlex 4-Class HIM
(22-HIM-A3 or 22-HIM-C2S) page 3-2
DriveExplorer Software
(version 3.01 or later) http://www.ab.com/drives/driveexplorer , or
DriveExplorer online help (installed with the software)
DriveTools SP Software
(version 2.02 or later) http://www.ab.com/drives/drivetools , or
DriveExecutive online help (installed with the software)