Quadrox WebCCTV User Manual - Manual (Page 81)

WebCCTV User Manual 81
Version 4.9 Series
Protocol (NAMOS) Screen
Click Finish button.
Depending on the drivers you installed together with the Alarm Component, it’s
possible some options are not present in the drop-down list.
If you entered the POS Device Configuration Wizard by clicking the Edit Device link
in the POS Screen, you can no longer change the protocol.
3.3.3.4.3 Device Connection
This tab is not available for NAMOS Devices. You don’t have to configure it.
3.3.3.4.4 POS Name
This tab is a part of the POS Configuration Wizard. The following parameters have to be
configured:
 Name – specify the name of the POS source.
 Number – specify the number.
Name (NAMOS) Screen
Click Next to enter the next POS Configuration Wizard Screen.