Quadrox WebCCTV User Manual - Manual (Page 110)

WebCCTV User Manual 110
Version 4.9 Series
The camera can have two states:
 Online
 Offline
Only network cameras will be shown in the Camera Scanning list.
Click Refresh button if you want to refresh the status of the cameras.
3.4.3 Load
This section allows you to check the load on the WebCCTV. When entering this section, a
table will be automatically generated that consists of parameters which may overload or
influence the stability of your WebCCTV at that moment. If some parameter is overloaded or
critical, an appropriate message will be shown with suggested corrective actions.
Load Screen
The following parameters are shown:
 CPU – This parameter shows how much the CPU is loaded.
 Memory – This parameter checks:
o Physical memory usage (RAM) relative to the available memory
o Server process load relative to the 2GB limit
 Network – This parameter checks the network load
 Disk – This parameter checks:
o The queue length for each logical disk
o Amount of transfers per second to each logical disk