Quadrox WebCCTV User Manual - Manual (Page 63)

WebCCTV User Manual 63
Version 4.9 Series
Name (Alarm – PMD I/O Device) Screen
Name (Alarm – Generic / RedLight Alarm Driver) Screen
Click Next to enter the next Alarm Configuration Wizard Screen.
3.3.2.5.2 PTZ
You can choose the PTZ reaction for the incoming alarm, meaning if an alarm is triggered the
specified camera will turn to the selected camera preset position. To configure this feature,
follow the steps below:
1. Select the camera from the drop-down list.
2. Select the preferred preset position.
3. Click the Add camera button.
You are able to change the preset position for the camera only after it has been added.
Settings presets is explained in the Video Browser manual.
If there are no PTZ camera configured in the system, the message “No PTZ cameras
are available in the system” will be shown.
PTZ (Alarm) Screen
To delete the camera, click Delete.
Click Next to enter the next Alarm Configuration Wizard Screen.