Quadrox WebCCTV User Manual - Manual (Page 124)

WebCCTV User Manual 124
Version 4.9 Series
Creating sequences can only be done in the Video Manager application.
Click on any camera button to stop automatic switching and revert to viewing
cameras manually.
When manual switching is completed, automatic switching resumes after 30 seconds.
Note that after selecting a sequence, the view will be automatically switched to Single
View mode. See 4.2.1 Single View for more information.
4.2.2.2 Mosaics
To select a Mosaic, select the mosaic from the drop-down list and click the Mosaic View
button. If the preferred mosaic is already selected in the drop-down list, you can click on
at the left side of the drop-down list.
Creating mosaics can only be done in the Video Manager application.
There are 9 predefined mosaic views available for configuration in the Video
Manager application. By default, no mosaic view is available in the Video Browser
application. In case video capture cards are installed, the respective mosaics will
automatically be created and installed by WebCCTV.
Mosaic View Screen