Quadrox WebCCTV User Manual - Manual (Page 60)

WebCCTV User Manual 60
Version 4.9 Series
3.3.2.3.2 Protocol
In this tab, the protocol has to be selected
Select Generic Alarm Driver in the drop-down list.
Protocol (Generic Alarm Driver) Screen
Click Finish button.
Depending on the drivers you installed together with the Alarm Component, it’s
possible some values are not present in the drop-down list.
If you entered the Alarm Configuration Wizard by clicking the Edit Device link in
the Alarms Screen, you can’t change the protocol anymore, but can only see which
protocol has been selected.
3.3.2.3.3 Connection
This tab is not available for the Generic Alarm Driver Device. You don’t have to configure it.
3.3.2.4 RedLight Alarm Driver
The RedLight Alarm Driver makes it possible to receive alarms for Red Light infractions.
This driver may and can only be used in cooperation with Quadrox N.V. For more
information, contact
[email protected] .
You need extra add-on software to be able to receive alarms.
To add the RedLight Alarm Driver, click Add Alarm Device button.
Alarms Screen
The Alarm Configuration Wizard will be opened for configuration.