Quadrox WebCCTV User Manual - Manual (Page 69)

WebCCTV User Manual 69
Version 4.9 Series
3.3.3 POS
This chapter explains how to configure the WebCCTV POS (Point of Sale) functionality. The
POS functionality is a part of the WebCCTV Alarm Component. It transforms POS printer
transactions into WebCCTV alarms. In other words, when a ticket is generated by the POS
terminal, an alarm is triggered within WebCCTV. This makes it possible to observe all
transactions and recordings which are recorded based on the incoming transaction data into
the WebCCTV system.
Following POS types (devices) are supported in WebCCTV:
 Serial Port POS
 Generic POS
 TP.Net
 NAMOS
The POS device and its sources have to be added in WebCCTV in order to let WebCCTV
process the incoming POS ticket information.
POS Screen
To enter the POS Device Configuration Wizard, click the Edit device or Add POS Device
link/button in the POS screen. The POS Device Configuration Wizard consists of four tabs
with easy to follow instructions.
The following POS Device Configuration Wizard tabs are described in the corresponding
subchapters of Serial Port POS, TP.Net and NAMOS:
 Name
 Protocol
 Connection
 Storage
After you added a Serial Port POS Device, you have to add a POS printer by adding it as a
source.