Quadrox WebCCTV User Manual - Manual (Page 26)

WebCCTV User Manual 26
Version 4.9 Series
3.2.4.2 Event Logger Configuration
The Event Logger Configuration defines the priority levels for the recorded events.
Depending on the selected option, WebCCTV will or will not store certain events.
Event Logger Configuration Screen
There are three Recorded Events levels:
 Only Critical Events – WebCCTV stores the most important system events that occur
when proper WebCCTV performance is impossible, e.g. recording break, failure to
detect a system component, etc.
 Important Events – WebCCTV stores system events labelled as “Only Critical
Events” and system events that play a significant role in the WebCCTV operating, e.g.
playback stream creating, system logging on, etc.
 All Events – WebCCTV stores all system events.
To apply new settings, click Apply.
To cancel your changes, click Cancel.
To go back to the Users Actions Log screen, click Return.
Event Logger Settings functionality is unique for both User Actions Log and
Server Actions Log.
3.2.5 Connected Users
This screen enables you to observe specific information about connected users such as:
 User Name – Name of the connected user.
 Client IP Address – In the Client IP address column you can observe two parameters,
which are separated by a colon. IP address is the IP address of the client computer
from which a user is connected to the WebCCTV server. Port number is the TCP port
of the client computer through which a user is connected to the WebCCTV server.
 Action – Click the Disconnect button to disconnect a user.
You can’t disconnect your own administrator session.