Quadrox WebCCTV User Manual - Manual (Page 64)

WebCCTV User Manual 64
Version 4.9 Series
3.3.2.5.3 Recordings
In this tab you are able to do the following:
 Add or delete cameras to record when an alarm occurs.
Multiple recordings can be assigned to one alarm. This way, an incident can be
monitored from different cameras and angles.
 Set the recording time before and after an alarm has occurred. This is also called the
pre and post alarm recording interval.
An alarm movie is labelled recorded footage from a camera you attached to the alarm,
i.e. when an alarm comes in, the specific period of time recorded from a specified
camera is labelled and saved. Once the recording is complete, it appears as an alarm
movie. If there aren’t any recordings (i.e. when there is no activity) for the period
when the alarm occurs, you won’t have an alarm movie. You can set a camera to
record all the time via the Camera Configuration Wizard.
To add the camera to be recorded when an alarm is triggered, follow the steps below:
1. Select the camera from the drop-down list.
2. Select the pre and post alarm label interval for each camera.
3. Click the Add camera button.
Recordings (Alarm) Screen
To delete a camera, click Delete.
Click Next to enter the next Alarm Configuration Wizard Screen.