Quadrox WebCCTV User Manual - Manual (Page 34)

WebCCTV User Manual 34
Version 4.9 Series
3.3.1.2.2 Connection
This tab is only available for network cameras. If you are adding an analogue camera,
this screen will not appear.
This screen allows you to define the parameters needed for a network camera connection:
 Camera IP address or DNS name
 Port
 User name
 Password
 Delivery mode
 Multicast IP-Address Port
To obtain these parameters, contact your system administrator or read the user manual
of the camera itself.
Use camera Administrator credentials in order to get all WebCCTV functionality.
A DNS name is a meaningful and easy-to-remember "handle" for an Internet address
or IP address.
Connection (Network camera) Screen
The delivery mode parameter is only available when the network camera supports MPEG
streaming:
 Unicast – normal connection type of a camera. It is simple in organization and
efficient when one connected client uses the camera. So if WebCCTV is the only user
of the camera, please use this type.