Quadrox WebCCTV User Manual - Manual (Page 71)

WebCCTV User Manual 71
Version 4.9 Series
3.3.3.1.1 Device Name
In this tab, you can adjust the POS Device name. It’s a part of the POS Device
Configuration Wizard.
Name (Serial Port POS) Screen
Click Next to enter the next POS Device Configuration Wizard Screen.
3.3.3.1.2 Device Protocol
In this tab, the protocol has to be selected. It’s a part of the POS Device Configuration
Wizard.
Select Serial Port POS in the drop-down list.
Protocol (Serial Port POS) Screen
Click Finish button.
Depending on the drivers you installed together with the Alarm Component, it’s
possible some values are not present in the drop-down list.
If you entered the POS Device Configuration Wizard by clicking the Edit Device link
in the POS Screen, you can’t change the protocol anymore, but can only see which
protocol has been selected.
3.3.3.1.3 Device Connection
This tab is not available for Serial Port POS Devices. You don’t have to configure it.