Seam-loc 24, 6' - 8' max, Incorrect – Metal Sales Seam-Loc 24 Installation User Manual
Page 12: Correct h
© Metal Sales Manufacturing Corporation/ Subject to change without notice/ Effective Date 12/03
800.406.7387 (Corporate Office) • www.metalsales.us.com
11
SEAM-LOC 24
®
6' - 8' MAX
When handling painted steel care should be taken to prevent scratching of material. Clean gloves should be worn at all times
to prevent a reaction with salts found on bare skin. Installers should wear rubber sole shoes to keep from scuffing material
while walking on the roof.
Handling of individual panels should be done carefully and properly to avoid bending or damaging. Seam-Loc 24 panels should be
carried by grasping the edge of the panel so that the Seam-Loc 24 panel is vertical to the ground. The Seam-Loc 24 panel should
not be carried with the panel horizontal to the ground as this could cause the panel to buckle or bend in the center.
Normally individual panels can be handled by people placed every 6'-0" to 8'-0" along the length of the panel.
INCORRECT
MANUAL HANDLING
CORRECT
H
ANDLING
M
ATERIAL
(
CONT
.)