Lenze L-force I/O System 1000 User Manual
I/o system 1000 l-force controls
Table of contents
Document Outline
- L-force I/O System 1000 I Parameter setting & configuration
- Contents
- 1 About this documentation
- 2 Product description
- 3 Configuring the station structure
- 4 Communication via system bus (CAN)
- 5 Navigation
- 6 Parameter setting
- 6.1 CAN bus coupler
- 6.2 Electronic modules - digital input
- 6.3 Electronic modules - digital output
- 6.4 Electronic module - analog input
- 6.5 Electronic modules - analog output
- 6.6 Electronic modules - counters
- 6.6.1 Parameters tab
- 6.6.2 Control of the counter
- 6.6.3 Continuous counting
- 6.6.4 Counting only once: No main counting direction
- 6.6.5 Counting only once: Main counting direction - counting up
- 6.6.6 Counting only once: Main counting direction - counting down
- 6.6.7 Periodic counting: No main counting direction
- 6.6.8 Periodic counting: Main counting direction - counting up
- 6.6.9 Periodic counting: Main counting direction - counting down
- 6.6.10 Function of the hysteresis
- 6.7 SSI electronic module
- 6.8 Save parameter settings and station structure
- 6.9 Load Lenze setting
- 7 Networking via CAN system bus
- 8 Error management
- 9 Application examples
- 10 Index
- Your opinion is important to us