Lenze L-force I/O System 1000 - Manual (Page 17)

2.0 EN - 11/2010
L
17
L-force Controls | I/O System 1000
Configuring the station structure
Search for connected devices
Step 4 - Read online data
9. Select the interface to be used from the Bus connection list field.
10. Click the Start Search button to start the search for connected devices.
• The Find online devices dialog box appears with status messages regarding the
search.
• The start-up wizard establishes automatically an online connection via the
selected interface to be able to read out data from the connected devices.
11. After the search has been completed, press Close to close the Find online devices
dialog box again.
12. Select the devices that are to be transferred to the project to be recreated from the
Identified devices list field.
13. Press Complete.
• The project is created with the selected settings. Below the project, all devices
selected before are listed in a flat structure.
• Now there already exists an online connection to the selected devices as you can
see from the yellow highlighted device icon in the Project view.

Stop!
If you change parameters in the »Engineer« while the device is connected online,
the changes will be directly accepted by the device!