Lenze L-force I/O System 1000 - Manual (Page 10)

L-force Controls | I/O System 1000
Product description
Features of the I/O system 1000
10
L
2.0 EN - 11/2010
2 Product description
2.1 Features of the I/O system 1000
The I/O system 1000 is suitable for the implementation of complex automation
applications, consisting of the following components: CAN bus coupler, electronic
modules, and backplane bus. The process data exchange via CAN is executed via the
CAN bus coupler. The station-internal communication of process and parameter data and
the transfer of diagnostic information is executed via the internal backplane bus.
 Modular system
 Dimensions of electronic module 100 Ч 76 Ч 12.5 mm
 Dimensions of head end
 Mounting on standard DIN rail (35 mm)
 Shield connection to standard metal rail (10 mm)
 The two-piece structure (separation of electronics and process integration) enables a
quick exchange of modules in the event of service
 Wiring level via spring terminal (max. 1.5 mm²)
 Operation at DC 24 V (DC 20.4 … DC 28.8 V)
 Supply voltage of electronics and process level is separated
 Up to 64 modules can be connected to a CAN bus coupler
 Individual labelling by insertable labels (item designation)
 Electrical wiring diagrams are directly printed on the module
 Electrical isolation towards the CAN bus and towards process level
 Creation of electrical isolations by power supply modules
 Support of the communication profile CANopen according to DS301/DS401
 10 Receive PDOs (RPDO) and 10 Transmit PDOs (RPDO) are available
 Selection between sync-controlled and event-controlled transmission