Lenze E84AYCER - Manual (Page 73)

EDS84AYCER EN 2.0 - 11/2010
L
73
E84AYCER communication manual (PROFINET)
Error messages
Short overview (A-Z) of the PROFINET error messages
12 Error messages
This chapter provides the error messages of the communication module as a supplement
to the error list in the software manual and the »Engineer« online help for the Inverter
Drive 8400.
12.1 Short overview (A-Z) of the PROFINET error messages
The following table contains all error messages of the communication module in
alphabetical order with the preset error response and, if available, the parameter for
setting the error response.

Tip!
When you click the cross-reference in the last column, you will get a detailed
description (causes and remedies) of the corresponding error message.

Software manual/»Engineer« online help for the Inverter Drive 8400
General information on diagnostics & fault analysis and error messages is
provided here.
Error text Error type Subject area
no.
Error no. Adjustable
in
Detailed
information
PROFINET: Data_Exchange status quit 0: None 444 25905 C13880/1 0x01bc6531
PROFINET: Error: Lenze setting loaded 1: Fault 444 25632 - 0x01bc6420
PROFINET: Exist. connect. to 8400 lost 1: Fault 444 12544 - 0x01bc3100
PROFINET: Internal error 1: Fault 444 24593 - 0x01bc6011
PROFINET: Internal error 1: Fault 444 24832 - 0x01bc6100
PROFINET: Internal error 1: Fault 444 24833 - 0x01bc6101
PROFINET: Internal error 1: Fault 444 26192 - 0x01bc6650
PROFINET: Invalid module configuration 1: Fault 444 25648 - 0x01bc6430
PROFINET: Invalid output data 4: Warning locked 444 25859 - 0x01bc6503
PROFINET: Invalid parameter set 1: Fault 444 25631 - 0x01bc641f
PROFINET: IP address error 1: Fault 444 25907 - 0x01bc6533
PROFINET: Memory: No access 1: Fault 444 21809 - 0x01bc5531
PROFINET: Memory: Read error 1: Fault 444 21810 - 0x01bc5532
PROFINET: Memory: Write error 1: Fault 444 21811 - 0x01bc5533
PROFINET: Restart by watchdogreset 1: Fault 444 24592 - 0x01bc6010
PROFINET: Stack init error 1: Fault 444 25908 - 0x01bc6534
PROFINET: Station name error 1: Fault 444 25906 - 0x01bc6532
PROFINET: Record parameter: Invalid read 4: Warning locked 444 25857 - 0x01bc6501
PROFINET: Record parameter: Invalid write 4: Warning locked 444 25858 - 0x01bc6502