Lenze E84AYCER - Manual (Page 12)

E84AYCER communication manual (PROFINET)
Safety instructions
General safety instructions and application notes
12
L
EDS84AYCER EN 2.0 - 11/2010
2 Safety instructions
2.1 General safety instructions and application notes
 Lenze drive components ...
– must only be used as directed.
Application as directed
( 14)
– must never be commissioned if they display signs of damage.
– must never be modified technically.
– must never be commissioned if they are not fully mounted.
– must never be operated without the required covers.
– can have live, moving and rotating parts during operation, depending on their
degree of protection. Surfaces can be hot.
 The following applies to Lenze drive components ...
– Only use permissible accessories.
– Only use genuine spare parts supplied by the manufacturer of the product.
 Observe all regulations for the prevention of accidents, directives and laws that apply
to the location of use.
 Observe all the specifications contained in the enclosed and related documentation.
– This is a precondition for ensuring safe, trouble-free operation and for making use of
the stated product features.
Properties
( 15)
– The specifications, processes, and circuitry described in this document are for
guidance only and must be adapted to your own specific application. Lenze does not
take responsibility for the suitability of the process and circuit proposals.
 All works on and with Lenze drive components may only be carried out by qualified
personnel. In accordance with IEC 60364 and CENELEC HD 384 these are persons who ...
– are familiar with installing, mounting, commissioning, and operating the product.
– have the qualifications necessary for their occupation.
– know and are able to apply all regulations for the prevention of accidents, directives
and laws that apply to the location of use.

Note!
It is absolutely vital that the stated safety measures are implemented in order to
prevent serious injury to persons and damage to material assets.
Always keep this documentation to hand in the vicinity of the product during
operation.