CiDRA SONARtrac PW VF-100 - Manual (Page 45)

20831-01 Rev 05 Page 5-27
Figure 23 Sensor Cover Installed on Sensor Support Installation Kit
12. Ensure the cover halves are aligned and then buckle the cover
latches.
13. Remove the cover support strap (upper) assembly.
14. .DO NOT REMOVE THE COVER LOWER SUPPORT STRAP.
THE COVER WILL SLIP AND DAMAGE THE SENSOR BAND.
15. Install sensor band upper boot seal clamps per Section 5.7.1.2.
16. Install sensor band lower boot seal clamps per Section 5.7.1.2.
Cover top support strap
Cover lower
support strap