CiDRA SONARtrac PW VF-100 - Manual (Page 31)

20831-01 Rev 05 Page 5-13
5.6.2 HD Product / Segmented Sensor Band Installations
Wrap the compliant sheet (optional) around the process pipe. The
ends of the compliant sheet should be positioned at the weld seam on
the pipe (if there is one). Refer to the following figures.
Figure 7 HD Sensor and Compliant Layer Illustration
45°
Compliant sheet (black)
Weld seam
Sensor band rails and
screw assemblies
Sensing element position on pipe
Process pipe
Compliant sheet
Weld seam
Pipe
Sensor band