Eppendorf BioSpectrometer kinetic - Manual (Page 56)

Methods
Eppendorf BioSpectrometer
® kinetic
English (EN)
56
Data export
The data will be transferred as Excel files (.xls) and can be read with Excel versions Excel 97 and later. For
each of the selected data packets, a worksheet is created in Excel. The file name consists of the method
name, the time and the date of the measuring series.
Select export version
Select data packets
Based on the method and parameter setting, only the available data packets are presented.
If no USB stick is connected, the first variant cannot
be selected.
Export to USB stick
1. Connect a FAT 32-formatted USB stick to the USB port 4 (see Main illustration on p. 9).
2. Start with [Export] "export to an external storage medium".
Export to PC
Requirement for the PC operating system: Windows XP, SP2 or a higher version.
1. Connect the device to the PC by using the USB cable on the USB port 8 (see Main illustration on p. 9).
2. Prior to beginning a new export make sure that any data that has been exported previously has been
saved to the PC hard drive. Otherwise, the new export will overwrite the data.
3. Start with [Export] "export to PC".
4. The exported data packet will be displayed on your PC as a removable medium named "eppendorf".
Open the Excel file on this drive and save it to the hard drive.
Results Primary result data; cannot be selected because they are always transferred.
Data Additional results data that are displayed during the measurement using the
[Data] softkey.
Graph Absorbance-wavelength-spectrum.
(Only for kinetic methods with the "linear regression" measuring procedure:
absorbance time graph.)
Graph data The basic numeric data for the graph.
"export only": Only available for export, i.e., not for printing.
Parameters Method parameters
Standards/results Results data of the standard evaluation.
Standards/graph (Only for standard evaluations with several standards:) absorbance concentration
graph.