Eppendorf BioSpectrometer kinetic - Manual (Page 39)

39
Methods
Eppendorf BioSpectrometer ® kinetic
English (EN)
6.4 Method procedure
A method procedure is composed of a maximum of 5 steps. The currently active step is highlighted visually.
After the last step,
print & export, of a measuring series, the start of a new measuring series is offered as a
next step. It once again starts with the sample measurement.
Use the [Next >] and [< Back] softkeys to navigate between method steps. With [Abort] and [Finish] you can
cancel or finish the measuring procedure. The name of this softkey changes from [Abort] to [Finish] after
the first sample measurement.
Wizard: the wizard at the top of the display will take
you through the method procedure. The currently
active method step is highlighted.
Method step Explanation
Check parameters Check method parameters. Carry out changes if required.
Measure standards Only for methods with standard evaluation:
Measure and evaluate standards. Alternatively, the last saved standard
evaluation can be used.
Measure samples Measuring samples
Process results Only for some methods: postprocess results, e.g. zoom scan graphs.
Print & export Assemble data packets for printing or exporting the data.