Eppendorf BioSpectrometer kinetic - Manual (Page 55)

55
Methods
Eppendorf BioSpectrometer ® kinetic
English (EN)
Linear regression
For kinetic methods evaluated using the "Linear regression" measurement method, you can subsequently
define the start and end times for the regression evaluation in the
process results method step.
6.4.7 Print & export
In the last optional method step, you can assemble data packets for all samples of a series of
measurements, or selected samples of a series of measurements, for printing to the printer, export to a USB
stick or export to a PC using a USB cable.
Selecting measuring points
• [First pt.] softkey: Define the first measuring
point for the regression evaluation. Select the
measuring point using and . Confirm with
enter.
• [Last pt.] softkey: Define the last measuring point
for the regression evaluation. Select the
measuring point using and . Confirm with
enter.
• At the same time that the times are modified, the
result is recalculated. The reagent blank is also
recalculated in the newly defined time window for
this purpose.
Select data packets
• Use the cursor keys for navigating and confirm
with enter.
Softkeys
• [Print]: Start printing.
• [Export]: Start export.
• [Sample]: Select individual sample results.
Select samples
• Press the [Samples] softkey to call up the sample
selection.
• Use the cursor keys for navigating and confirm
with enter.
Softkeys
• [Select all]: Select all samples
• [De-Sel. all]: Cancel selection.