Brocade BigIron RX Series Hardware Reference Manual - Manual (Page 39)

Brocade BigIron RX Series Hardware Installation Guide 27
53-1002483-03
Installing a BigIron RX-4 switch
2
FIGURE 16 Positioning the screws in a rack
3. Starting with the chassis that you want to mount in the lowest position in the rack, mount the
chassis in the rack as shown in Figure 17 . With two or more people lifting the chassis, slip the
wide portion of each keyhole slot over the corresponding screw in the rack.
FIGURE 17 Mounting the BigIron RX-4 or BigIron RX-8 chassis in a rack
4. Slide the chassis down so that the screw heads are in the narrow portion of the keyhole slots.
5. Tighten the screws to secure the chassis in place.
1 Unequal flange equipment rack 2 Network equipment rack
1 Standard 19 inch rack
5" 3"
1 2
1