Brocade BigIron RX Series Hardware Reference Manual - Manual (Page 25)

Brocade BigIron RX Series Hardware Installation Guide 13
53-1002483-03
Hardware features
1
NOTE
The device will be FE or GE capable, but will only display that is GE to indicate the maximum speed
capability of the module.
NOTE
The actual speed will be displayed once the link is seen and the port auto-senses the speed of the
SFP.
You can issue the show media command to display the type of optic installed and determine the
speed the port will run at when the link is received.
Figure 7 shows the 24-port 1 Gigabit Ethernet mini-GBIC (or SFP) module’s front panel.
FIGURE 7 24-port 1 Gigabit Ethernet SFP module front panel
The front panel includes the following control features:
• LEDs
• 24 1-Gigabit Ethernet mini-GBIC (SFP) ports
Gigabit Ethernet interface module (RJ-45)
Figure 8 shows the 24-port 1 Gigabit Ethernet module’s front panel.
FIGURE 8 24-port 1 Gigabit Ethernet module front panel
The front panel includes the following control features:
1 Port status LEDs
TABLE 5 Gigabit Ethernet module LEDs
Position State Meaning
Below each Ethernet
port
(left-side LED
supports port in top
row while right-side
LED supports port in
bottom row) On or blinking The port is transmitting and receiving packets.
Off for an extended period The port is not transmitting or receiving packets.
1