Xerox WorkCentre M24-2780 - Manual (Page 61)

1–19
U S E R G U I D E (C O P I E R )
Loading Stock
Paper
Load the paper into Trays 1, 2, 3, and 4 with the preferred printing
side up.
Load the paper into Tray 5 (Bypass) with the preferred printing
side down.
The capacity of the tray varies with the paper weight that is loaded
in the tray.
NOTE: For the best results, use only the recommended paper
sizes, paper weights, or paper types. If you do not use
recommended papers, you may experience copy quality
problems, paper jams, or possible component failures.
If you are loading pre-drilled paper load it into Tray 5 (Bypass) with
the undrilled long edge as the leading edge (holes to the left) for 1
sided output, the undrilled long edge as the trailing edge (holes to
the right) for 2 sided output.