Xerox WorkCentre M24-2780 - Manual (Page 59)

1–17
U S E R G U I D E (C O P I E R )
Loading Paper
This section contains basic information about loading paper and
transparencies, and about using paper trays. It also includes some
paper usage guidelines for the WorkCentre 24.
For more information about the materials you can use, refer to the
Recommended Materials for the WorkCentre 24.
Tray 1
Tray 1 can accommodate an assortment of standard paper sizes,
from 5.5x8.5 through 11x17 inch, and A3 through B5. Tray 1 has
width and length adjustment guides that can be adjusted if the
paper size in the tray needs to be changed.
Tandem Tray Module
Trays 1,2,3 and 4 hold the paper supply for the WorkCentre 24
printer/copier.
Trays 1 and 2 can accommodate an assortment of standard paper
sizes, from 5.5x8.5 through 11x17 inch, and A3 through B5. Trays
1 and 2 have width and length adjustment guides that can be
adjusted if the paper size in the tray needs to be changed. Trays 3
and 4 can accommodate 8.5x11 inch, A4 or B5 paper.
3-Tray Module
Trays 1 through 4 can accommodate an assortment of standard
paper sizes, from 5.5x8.5 through 11x17 inch, and A3 through B5.
Trays 1 through 4 have width and length adjustment guides that
can be adjusted if the paper size in the tray needs to be changed.
Tray 5 (Bypass)
Tray 5 (Bypass) is located on the left side of the printer/copier.
Tray 5 (Bypass) can accommodate transparencies and other
specified paper stocks, and various paper sizes up to 12x18 in.
Tray 5 (Bypass) has the capacity to hold up to 100 sheets.