Xerox WorkCentre M24-2780 - Manual (Page 362)

4–28
U S E R G U I D E (M A C H I N E A D M I N I S T R A T O R )
Reduce/Enlarge Sets the default for Reduce/Enlarge on the Basic Copying screen.
Select one of nine buttons. Seven buttons are registered as preset
ratio buttons, 100%, and Auto %.
Enter the setting on the Numeric Keypad using the numbers listed
in the following table. The default is 0, 100%.
NOTE: If the default for Paper Supply is set to Auto, Auto% cannot
be selected for Reduce/Enlarge.
Paper Supply This sets the default for Paper Supply on the Basic Copying
screen.
Enter the setting on the Numeric Keypad using the numbers listed
in the following table. The default is 0, Auto.
If the default for Reduce/Enlarge is set to Auto%, Auto cannot be
selected.
Setting Description
0 100%
1 Ratio set to R/E Preset 1
2 Ratio set to R/E Preset 2
3 Ratio set to R/E Preset 3
4 Ratio set to R/E Preset 4
5 Ratio set to R/E Preset 5
6 Ratio set to R/E Preset 6
7 Ratio set to R/E Preset 7
8 Auto%
Setting Description
0 Auto
1 Tray 1
2 Tray 2
3 Tray 3
4 Tray 4
5 Tray 5 (Bypass)