Xerox WorkCentre M24-2780 - Manual (Page 265)

2–101
U S E R G U I D E (P R I N T )
Options for the Whole Document
These settings are effective for the whole document.
Options Contents
Image Enhancement When this is checked, edges of the whole document will be smoothed.
With this selection the effect of density smoothing might be lost for some
documents that contain images (bitmaps) whose density seems to be
smoothed. When this happens, uncheck the check box. Checking and
unchecking the check box does not change the printing speed.
NOTE: This option is available when Print Mode on the Graphics
tab has been selected as High Speed.
Draft Mode When this box is checked, less toner will be used for printing. In general.
The colors will be lighter when this feature is used compared to when it
is not used. Suitable for printing documents whose image quality is not
very important, like draft.
Resolution Specifies the resolution to be used in the application program when
printing.
Options available: Normal (600 dpi), Layout (300 dpi) and Lines (200
dpi).
Although the resolution of this machine is 600 dpi, selecting Layout (300
dpi) or Lines (200 dpi) will inform the application program which cannot
usually print at 600 dpi, to print at 300 or 200 dpi.
Even if Layout (300 dpi) or Lines (200 dpi) has been selected for
printing, it will not effect the print result much although the dots might
become coarser when fonts have been downloaded.